HP+ Gear Drive Camchest Kits / '99-'17 Twin Cam

Complete Feuling HP+ gear drive camchest kit with Reaper cams, for '99-'17 Twin Cam motors.

Gear drive reliability plus the full Feuling camchest, packaged under one part number. Gear drive removes the cam chain tensioner as a wear item altogether — on a chain drive motor that tensioner shoe wears, and when it wears through the debris goes into the oil system.

Each kit carries your choice of 525, 543 or 574 Reaper gear drive cams, the HP+ High Volume oil pump, High Flow billet camplate, roller lifters and pushrods. Pick your generation first, then your cam. The late kits cover '06 and up Dyna and all '07-'17 Twin Cams, which share the same engine internals.

Features

• Complete kit: Feuling HP+ High Volume oil pump, High Flow billet camplate, Reaper series camshafts, HP+ hydraulic roller lifters, quick install adjustable or one-piece pushrods, Timken/Koyo bearings, gaskets, O-rings, ARP fasteners, washers, moly lube and Loctite
• Gear drive removes the cam chain tensioner as a wear item entirely
• Feuling states 25 to 35 degree cooler engine temperatures
• Feuling states 15 to 30 degree cooler oil temperatures
• Feuling states 15 to 30 more pounds of oil pressure
• Quieter, smoother operation; Feuling states it eliminates wet sumping, blowby and oily air cleaners
• Quick install adjustable pushrods go in without removing the top rocker covers
• Made in the U.S.A.

Specifications

525 Reaper — the mildest grind here, strong low end

• Intake — 0.525" valve lift, opens 4°, closes 42°, 226° duration at 0.053", 0.099" lift at TDC, 109° lobe centerline
• Exhaust — 0.535" valve lift, opens 51°, closes 5°, 236° duration at 0.053", 0.112" lift at TDC, 113° lobe centerline

543 Reaper — broader midrange

• Intake — 0.543" valve lift, opens 15°, closes 43°, 238° duration at 0.053", 0.160" lift at TDC, 104° lobe centerline
• Exhaust — 0.553" valve lift, opens 56°, closes 12°, 248° duration at 0.053", 0.140" lift at TDC, 112° lobe centerline

574 Reaper — the largest grind in this kit

• Intake — 0.574" valve lift, opens 15°, closes 45°, 240° duration at 0.053", 0.163" lift at TDC, 105° lobe centerline
• Exhaust — 0.574" valve lift, opens 61°, closes 14°, 255° duration at 0.053", 0.143" lift at TDC, 113.5° lobe centerline

Cam specifications are measured at the lifter at 0.053" lift.

Fitment

• '99-'06 Twin Cam, except '06 Dyna
• '06 and up Dyna, and all '07-'17 Twin Cam

Harley fitted Dyna with the newer style Twin Cam motor in 2006, a year before the rest of the range. So an '06 Dyna takes the late kit, and every Dyna from '06 on runs the same engine internals as an '07-'17 Twin Cam.

Before You Order

Note: Installing gear drive cams requires a separate S&S or Andrews 4-gear drive kit, sold separately.

No shipping to California.

⚠️ VERIFY your cam grind against your compression, exhaust and tuning plans before ordering.

Common Questions

Which generation kit do I need?
Match the motor, not just the year. '99-'06 Twin Cams take the early kit. '06 and up Dyna and all '07-'17 Twin Cams take the late kit — Dyna moved to the newer motor in '06, a year ahead of the rest of the range.

Which cam grind is right for me?
The 525 favours low end, the 543 broadens the midrange and the 574 reaches further up. Full timing figures for all three are in the Specifications above.

Do I need anything else for gear drive?
Yes. Installing gear drive cams requires a separate S&S or Andrews 4-gear drive kit.

Why can't it ship to California?
California emissions regulations restrict this kit from sale to CA addresses.

About Feuling

Feuling Parts builds Harley-Davidson valvetrain and oiling components in the U.S.A., and is best known for oil pumps, camplates and the Reaper camshaft line. Their reputation rests on the oiling side of the motor — the parts that decide whether a cammed engine lasts.

Works With

Want to keep the factory chain drive instead? See the HP+ Chain Drive Camchest Kits. For the tier above, with Race Series lifters and larger grinds, see the Race Series Gear Drive Camshaft Kits. Add a Camshaft Installation Kit if you do not already have the bearings and hardware.