LED Handlebar Marker Lights / '00-'17 Dyna | XL | Softail
Tax excluded. Shipping calculated at checkout
Fitment
Ships within 24 hrs. Arrives within 1 - 5 days depending on location
High intensity amber LED markers small enough to mount off the mirror stem, at one inch wide by half an inch tall.
These exist for the bike that has had its stock front turn signals taken off. They mount using the mirror stems or the mirror stem mounting bolts, so no new holes go in the bars and nothing hangs off a bracket. At one inch by half an inch they read as a marker rather than a lamp, which is the look people are after, and the LEDs are high intensity to make up for the size. The wire leads are 36 inches, long enough to run inside the bars or down to the headlight bucket without splicing in an extension.
Features of the LED Handlebar Marker Lights
- Single function, high intensity amber LEDs
- Measure 1 inch wide by 1/2 inch tall
- Mount using the mirror stems or the mirror stem mounting bolts
- 36 inch wire leads
LED Handlebar Marker Light Fitment
- '00-'17 Harley-Davidson Dyna
- '00-'17 Harley-Davidson Sportster
- '00-'17 Harley-Davidson Softail
⚠️ VERIFY your mirror mount thread and your turn signal wiring before ordering. These are single function lamps, so if your bike runs the front signals as running lights as well, the wiring has to be set up for that.
Common Questions About the LED Markers
Are these single function or run and turn?
Single function. They do one job, which keeps them small.
Will I need load equalizers?
Often yes. Swapping incandescent bulbs for LEDs drops the current the flasher sees, which usually shows up as hyper-flash until a load equalizer or an LED-compatible flasher goes in.
Do they come with mounting hardware?
They mount using the mirror stem or its bolt, so the hardware already on the bike is what holds them. Check clearance at the stem before you commit.
Choose options
