Hart-Luck Signature Lock-On Grips / TBW

ODI's Hart-Luck signature full waffle grip on genuine Lock-On technology, with the throttle tube molded in for a throttle by wire Harley-Davidson.

Lock-On is what separates these from a slip-on grip. The clutch side clamps to the bar on a billet aluminum collar with T15 Torx bolts, so there is no glue, no safety wire and no set screws, and no chance of the grip rotating on a wet morning. On the throttle side the grip is molded onto a throttle tube cut for your model, which is why they drop straight onto a throttle by wire bike. The full waffle pattern is straight off Jason Hart and Carey Hart's moto background: it damps vibration through the palm and gives you traction when your gloves are soaked.

Features of the Hart-Luck Signature Lock-On Grips

• Genuine ODI Lock-On technology, no grip glue and no safety setscrews
• Billet aluminum clutch side clamp for slip-free security
• T15 Torx bolts for solid, twist-free mounting
• Full waffle moto pattern reduces vibration and improves grip in all conditions
• In-molded throttle tube specific to your model
• Simple installation and removal
• Anodized clamp colours to match a custom build
• Made in the U.S.A.

Hart-Luck Lock-On Grip Fitment

• '08 and up Harley-Davidson models with throttle by wire

⚠️ VERIFY that your bike is throttle by wire and not cable operated. The throttle tube is molded into this grip, and a cable throttle needs a different tube entirely.

Common Questions About the Hart-Luck Grips

Do I need grip glue?
No. That is the point of Lock-On. The clutch side clamps mechanically to the bar and the throttle side is molded to its own tube.

Will they fit heated bars or internal wiring?
They fit a standard 1 inch throttle by wire bar. Confirm before ordering if you are running anything non-standard through the bar end.

Is the waffle pattern hard on bare hands?
It is a moto pattern, designed to be ridden in gloves. In gloves it is the pattern that gives you the most control when things get wet or rough.