High Flow Cam Plate / '99-'17 Twin Cam

• Increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages
• Camplate matches the oil portholes throughout the camplate to the port holes in the engine case increasing engine oil flow throughout the engine
• 25-35 degree cooler engine temperatures and
• 20-30 degree cooler oil temperatures
• Made from 7075 billet aluminum which is 50% harder and stronger than the factory, SE® and other aftermarket camplates
• The 7075 increases the strength and hardness of the camplate, holding tighter tolerances under temperature eliminating flexing and the need for bronze bushings
• Camplates are pressure tested and pressure relief valve is seated, sealed and set to pop off at 55-60 psi
• When matched with the Feuling® Race Series oil pump rear wheel power gains of 3 Horsepower and 4 ft/lbs of Torque can be achieved
• For use ONLY with the Feuling® oil pumps
• Camplates for 99-06 Twin Cam (except 06 Dyna) have tighter cam bearing bore tolerances for improved press fit
• Bearing and retainer plate hardware is included
• Camplates for 07-17 Twin Cam (and 06 Dyna) have tighter cam journal tolerance for improved cam fitment
• Added cam journal oil groove for cold startup protection and increased cam journal lubrication
• Added oil pressure feed holes to front and back of cam journals to prevent excessive thrusting wear
• Made in the U.S.A.

NOTES - 

1. Block-off plate PART # 9320036 required when using gear drive cams.
2. Requires the use of 07-17 style Feuling HP+ or Race Series oil pump PART #S 9320023 or 9320026.
3. Requires the use of 99-06 style Feuling HP+ or Race Series oil pump PART #S 9320018 or 9320020.
4. Includes tensioner pins and guide hardware.
5. Requires 07-17 hydraulic chain drive system (tensioners, chains, sprockets and hardware), see Feuling tensioner kit part # 9251069 or 9251070